2024-01-04 86
1. Please have experienced and qualified professionals perform the installation. During installation, the faucet should be kept away from hard objects as much as possible, and cement, glue, and other
2024-01-04 75
In general, after using the faucet for a period of time, there will be residual water stains, and some faucets may also show internal blockage problems such as reduced water volume or water splitting.
2024-01-04 76
1. Connect the hose to the faucet. First, insert the faucet hose into the faucet installation port and tighten it by hand. Try pulling to see if the connection is secure. Then fix the other fasteners
2024-01-04 65
1. When installing this type of faucet, make sure that its sensing window is facing downwards and the distance between it and the bottom of the sink is at least 25CM, otherwise it will affect its sens
2024-01-04 91
1. Iron painted faucets are the easiest and cheapest to rust; The most common form of galvanized iron is its metallic gray appearance, which is not high-end. It is welded internally, which contains le
2024-01-04 58
1. Look at the appearance. Firstly, look at the brightness of the surface. The valve body of the faucet is made of brass, which is polished and shaped, and then plated with nickel and chromium on the
2024-01-04 76
[Beauty Mirror. Product Introduction]Beauty mirrors, also known as makeup mirrors or bathroom mirrors, are currently available in the market according to their materials, including all copper beauty m
2024-01-04 90
In the industry, we often hear the term "illuminated mirror". So what exactly is a illuminated mirror? The full name of a illuminated mirror is a bathroom mirror with LED light strips, commonly known
2024-01-04 96
In order to maintain their youthful and beautiful "golden age appearance", many beauty conscious girls not only put in a lot of effort and cost in skincare products, but also undergo some similar meth
2024-01-04 80
The faucet of the basin is connected to the angle valve through the inlet hose, and is fixed on the basin surface by fastening the nut. When disassembling, the first thing to do is to focus on these t