The faucet of the basin is connected to the angle valve through the inlet hose, and is fixed on the basin surface by fastening the nut. When disassembling, the first thing to do is to focus on these two aspects:

Before opening the basin faucet, locate the inlet valve. The inlet valve is generally installed on the wall below the basin. First tighten the corner valve to cut off the water, otherwise a lot of flowing water will be wasted during the process of dismantling the basin faucet;

2. After turning on the corner valve, there will still be some water remaining in the water pipe. Turn on the faucet and drain the remaining water;
             
3. When installing the basin faucet, connect the inlet port of the basin faucet with the angle valve using an inlet hose. When disassembling, hold the water pipe with one hand and twist the wrench with the other hand to remove the end of the inlet hose that connects to the basin faucet;

4. When installing the basin faucet, it needs to be tightened after connecting the inlet hose; The nut locks it tightly, so after removing the water inlet hose, find the fastener of the basin faucet, use pliers or a wrench to unscrew it, and then remove the basin faucet.

The article originates from:Baoshan Town Baolong Bathroom Hardware Factory in Heshan City

www.baolonghs.com