1. Please have experienced and qualified professionals perform the installation. During installation, the faucet should be kept away from hard objects as much as possible, and cement, glue, and other substances should not be left on the surface to avoid damaging the gloss of the surface coating. If your faucet is used in a newly built house, as the water supply network is newly laid, there will inevitably be impurities such as sand particles in the water. Before installation, be sure to remove the debris in the pipeline and drain the water for a long time until the water quality becomes clear before installing the faucet.

2. When using it open, do not use too much force to cause damage to the human body. Simply roll it quietly along the way. Even traditional faucets do not require a lot of effort to tighten.

3. After normal use, the surface of the faucet should be wiped clean. Do not use the handle of the faucet as a handrail to support or use it.

4. When the water pressure is not less than 0.02mpa, if the water output is reduced or even the water heater stalls after a period of use, block the cold and hot water flow, use a wrench to quietly unscrew the water nozzle screen cover at the outlet of the faucet, clean impurities, and then carefully install it. Generally, it can be restored to its original state.

5. The metal hose of the shower head of the bathtub faucet should be kept in a natural and stretched state, and should not be coiled around the faucet when not in use. When using or not in use, be careful not to form a dead angle at the joint between the hose and the valve body to avoid breaking or damaging the hose.

Article organization: Kaiping bathroom faucet manufacturer www.baolonghs.com