I don't know if we have ever thought about why there are so many bubbles in the water flowing out of the faucet? Actually, this is mainly because the faucet is equipped with a bubbler, which can make the water softer and prevent splashing.

1、 What is a bubbler? A bubbler can allow water and air to mix thoroughly, producing a foaming effect that effectively reduces water consumption and saves water. At present, all round faucets on the market are equipped with a bubbler, while square and flat faucets do not have a bubbler.

2、 The effect of a bubbler. Generally speaking, the home faucet device with a bubbler has the following three effects. 1. Filtering: A bubbler can filter out some sediment and impurities in water. 2. Water saving: A bubbler can allow water and air to touch freely, creating a foaming effect, and then reduce water consumption. Generally, a faucet equipped with a bubbler can save about 50% of water compared to regular ones. 3. Splash prevention: When water flows into the air, it becomes soft and reduces the impact force. It can prevent water from splashing everywhere and also have a good noise reduction effect together.
                           

3、 How to clean the bubbler? As we mentioned earlier, a bubbler can filter out impurities, but over time it is inevitable that it will become clogged and requires cleaning. Be able to remove the frother, soak it in vinegar, use a small brush or other tools to clean debris, and then reinstall it. Here comes a question, which is: how to disassemble the faucet aerator? Use a small screwdriver to insert into the gap of the foaming machine frame and forcefully pry it open. Open the top plastic card top net and take out the stainless steel net in the center (there are four). After cleaning, install it back in the order of disassembly (the stainless steel mesh should have the burrs facing upwards, and finally the plastic card top mesh should be installed and stuck).

The article originates from the manufacturer of flat disc faucets: www.baolonghs.com