1. Dig open the pipes inside the wall and readjust the orientation of the water outlet;
2. Adjust the spacing between the two water outlets using two biased feet, that is, first use the first biased foot separately, and then connect the other biased foot with an internal thread connector. This can increase the spacing between the biased feet by twice, but it will be a bit unsightly.
Two options: 1. Excavate the pipes inside the wall and readjust the orientation of the water outlet; 2. Adjust the spacing between the two water outlets using two biased feet, that is, first use the first biased foot separately, and then connect the other biased foot with an internal thread connector. This can increase the spacing between the biased feet by twice, but it will be a bit unsightly. Think about it for yourself.

Just connect each elbow.

A faucet is a valve that controls the flow of water. The faucet of a British washbasin or bathtub is usually separated by the cold and hot ends. In the United States and other countries, most are hybrid faucets. The latter produces water only after mixing cold and hot water, so it can control different temperatures to use water. The main raw materials for faucets are copper and zinc alloys. If the faucet is installed alone, the tap water will either be hot or cold. Generally, hot faucets have a red indicator light or symbol, while cold water faucets usually have a blue or green indicator light or symbol. In native English speaking countries, faucets are often labeled with an "H" or "C" to represent hot or cold. Most residential, commercial, and industrial houses have a faucet in front of their door, which is equipped with a square shaped switch to prevent passersby from using water indiscriminately.
Article source: Flat disc faucet manufacturer www.baolonghs.com