Faucet is an essential kitchen and bathroom item for home decoration, and it is a product that people must use every day. However, it is precisely because of its frequent use that maintenance is necessary: 1. Do not use too much force to turn on and off the faucet, just turn it quietly and smoothly. Even traditional faucets do not require a lot of effort to tighten. Especially, do not use the handle as a handrail to support or use it.
2. The metal hose of the shower head of the bathtub faucet should adhere to a natural stretching condition, and should not be coiled around the faucet when not in use. When using or not in use, be careful not to form a dead angle at the joint between the hose and the valve body to avoid breaking or damaging the hose.
3. If the water pressure is not less than 0.02mpa (i.e. 0.2kgf/cm2), and after using it for a period of time, if the water output decreases or even the water heater stalls, the sieve cover can be quietly unscrewed at the outlet of the faucet, and generally the recovery can be restored to its original state.
4. Experienced and qualified personnel should be invited to carry out the construction of the equipment. pretendWhen placing, the faucet should be kept away from hard objects as much as possible, and cement, glue, and other residues should not be left on the surface to avoid damaging the surface coating luster. Pay attention to removing debris from the pipeline and installing a faucet.
5. When the room temperature is below zero degrees Celsius, if the handle of the faucet feels abnormal, hot water should be used to scald the bathroom product until it feels normal. This operation will not affect the service life of the faucet valve core before use.
6. Water contains trace amounts of carbonate compounds, which evaporate on the surface of metals and form scale, causing corrosion on their surface. As a result, it will affect the service life of the faucet. It is necessary to use a soft cotton cloth or sponge to frequently wipe the surface of the faucet. It is important not to use a metal cleaning ball or some cleaning cloth to clean the faucet. Simply scratch the surface of the faucet. Also, do not use hard objects to touch the surface of its water nozzle.
7. The phenomenon of dripping water after the new faucet is turned off is caused by residual water in the inner chamber of the faucet, which is a normal phenomenon. If there is continuous dripping water for a long time, it is a problem with the faucet. If there is a leak, it indicates that the product has a quality issue.
Article origin: Flat disc faucet manufacturer www.baolonghs.com