To maintain a bright appearance of the faucet, please clean it regularly or regularly:
1. Rinse with clean water and dry with a soft cotton cloth.
2. Do not use any cleaning agents, sandcloths, or sandpaper that have a grinding effect.
3. Do not use any acidic cleaning agents.
4. If a lot of cleaning work is required, please follow the following procedures.
a. Use clean water and soft cloth to tidy up the dirt and film on the surface as much as possible.
b. Use any of the following methods to clearDetergent removes external dirt and scale film.
(1) Mild liquid cleaner.
(2) A colorless glass cleaner that has no grinding effect and can completely dissolve in powder form.
(3) A polishing solution without grinding effect.
After cleaning, clean all the cleaning agents with clean water and wipe dry with a soft cotton cloth.
5. The main display of the faucet has been inspected and adjusted at the factory. Please do not disassemble it by yourself.
6. When installing and using the faucet, please use normal force to avoid breakage of the handle, curved feet, etc. During the installation of the faucet product, it is necessary to cover and protect it. Any cement, mortar, or sand that drips onto the surface must be cleaned within 30 minutes.
7. When the water pressure is not less than 0.02mpa, if the water output decreases or even the water heater stalls after using it for a period of time, the bubbler at the outlet of the faucet can be gently turned on to remove impurities, and generally it can recover as usual.
Article source: Flat disc faucet manufacturer www.baolonghs.com