As an important bathroom product that controls water flow and plays a water-saving role, faucets can be used to control water flow, but undoubtedly are indispensable.
When choosing faucets, more and more people are paying attention to quality, but often there are various types of "all copper faucets", "stainless steel faucets", as well as "water-saving faucets", "induction faucets", and so on in the market. The so-called water-saving faucet does not save water at all. When I bought a beautifully designed faucet, I found that it couldn't be installed, and all copper turned into half copper and half iron. Such incidents are not uncommon.
Common misconceptions when buying flat plate faucets
Misconception 1: Sensing faucet water-saving
Many consumers think that induction faucets are convenient and water-saving, but in fact, induction faucets not only have low water output, high prices, but also high maintenance costs. Induction faucets are generally installed and used in public places, office buildings, and government agencies. But the use of induction faucets in households is not very practical, and maintenance is relatively time-consuming and laborious.
Support:
Not only sensing faucets can save water, manualFaucets also have water-saving and energy-saving features. Manual faucets not only have a long lifespan, but are also easy to repair, making them relatively more cost-effective. If you find it troublesome to switch, you can choose to install a press type faucet, which is convenient without turning and can achieve the water-saving effect of timed water cut-off. The price is relatively cheap and the cost-effectiveness is high.
Misconception 2: The smaller the flow rate, the more water-saving it is
The flow rate of the faucet has water-saving standards, and both too large and too small flow rates are not conducive to water-saving. Many people have the misconception that a faucet with low flow can save more water. The water consumption is equal to the flow rate multiplied by the water usage time. If the flow rate is too small, it will significantly prolong the water usage time and fail to achieve the water-saving effect. Sometimes the flow rate of the faucet is too low, which may be due to problems with the faucet valve or blockage of slag. It should be cleaned or replaced in a timely manner. Therefore, do not think that a low flow rate is better.
Support:
It is recommended to pay attention to the cleanliness of the faucet, clean and replace the faucet valve and filter screen in a timely manner, so as to maintain the cleanliness and hygiene of the water and protect human health. Water is the source of life, so it is related to the hygiene of water. We cannot neglect it, and the hygiene of faucets is the foundation. A clean and shiny appearance does not necessarily mean a clean interior.
Misconception 3: The bubbler faucet saves water in any situation
The outlet of the faucet consists of two parts: an external filter and an internal bubbler. The bubbler mainly increases the number of bubbles in the water, reduces the water output, and prevents splashing and controls the flow rate, thus achieving a certain water-saving effect. But not in all cases, faucets with bubblers save water, weakening the impact of water flow and reducing the ability to wash and remove dirt. Therefore, when cleaning very dirty things, it is necessary to use a large amount of water to clean, which is not conducive to water conservation.
Support:
When choosing a faucet with a bubbler, attention should be paid to the installation position. For washbasins and kitchen sinks, consider installing faucets with bubblers. The floor mop pool installed on the balcony does not need to use a faucet with a bubbler, which not only increases the speed of flushing the floor mop, but also enhances the flushing ability, achieving a certain water-saving effect.
Misconception 4: Both faucets have cold and hot temperature adjustments
Faucets can be classified according to their usage, including basin faucets, kitchen basin faucets, bathtub faucets, washing machine faucets, and mop pool faucets. Many consumers believe that as long as it is a faucet, it will have a temperature adjustment function for both hot and cold.
Support:
The temperature regulation function of the faucet must be equipped with two inlet hoses and a ceramic valve core for both hot and cold water. There are three types of faucets, including basin faucets, kitchen basin faucets, and bathtub faucets, available in cold, warm, or single cooling modes, while washing machine faucets and mop pool faucets only have single cooling modes.
Misconception 5: Choosing a faucet does not require considering a basin
A tabletop basin is a type of tabletop basin that is increasingly favored by people due to its clean appearance and versatile design. Many consumers, after installing a basin on the table, do not notice that the basin has become higher and still choose a regular basin faucet; Another situation is that the basin only has one installation hole, but the consumer buys a dual control faucet, and the result is that it cannot be installed.
Support:
The faucet needs to be installed on the basin, and the actual situation of the basin must be considered when purchasing. If it is a basin or column under the table, choose a regular basin faucet. If it is a basin on the table, choose a basin faucet on the table (the water outlet height is higher than the edge of the basin); If you prefer a dual handle dual control faucet, the basin needs to have three mounting holes.

Article source: Flat disc faucet manufacturer www.baolonghs.com