After selecting the faucet, improper maintenance can also affect its service life. This is also a headache for many people. The frequency of using a faucet is quite high, and it is basically used every day in daily life. In such a high frequency of use, the manufacturer of a flat disc faucet tells you how to maintain the faucet and make its lifespan longer? In fact, this is not a difficult task. As long as the installation, use, and maintenance are correct and proper, the actual service life of the faucet can be extended, and it can always remain shiny and new.
1. When the air temperature is below zero degrees Celsius, if the handle of the faucet feels abnormal, the bathroom product must be scalded with hot water until it feels normal before use. Otherwise, it will affect the service life of the faucet valve core.
2. Dripping may occur after the faucet is turned off, which is caused by residual water in the inner chamber of the faucet after it is turned off, and is a normal phenomenon. If there is dripping for more than ten minutes for a long time, it is considered a leakage, indicating a quality issue with the product.
3. Due to the presence of trace amounts of carbonate in water,And it is easy to form scale on the metal surface after evaporation, which will corrode the surface of the faucet, thereby affecting the cleanliness and service life of the faucet. The manufacturer of flat disc faucets states that it is necessary to regularly wipe the surface of the faucet with a soft cotton cloth or sponge accompanied by neutral soap water (note: do not wipe with corrosive or acidic substances), and then dry the surface with a soft cloth. Avoid using metal wire balls or scouring cloths with harder particles. Additionally, do not collide with hard objects to damage the surface of the water nozzle.
4. Do not use too much force to turn on and off the faucet, just turn it gently and smoothly. Even traditional faucets do not require a lot of effort to tighten. The flat disc faucet manufacturer reminds not to use the handle as a handrail to support or use it, especially. Many people are accustomed to using some force to turn off the faucet after using it, which is not advisable. This not only does not prevent water leakage, but also causes damage to the sealing valve, resulting in the faucet not being tightly closed.
5. When the water flow decreases, impurities need to be removed. If a decrease in water output is found under a water pressure of no less than 0.02mpa, it is possible that the faucet is blocked. The solution is to gently twist the sieve cover of the water nozzle at the outlet of the faucet with a wrench, clean the impurities, and then carefully install it. Generally, it can be restored to its original state.
To maintain a faucet for long-term use, we need to patiently maintain it. The method of flat plate faucet manufacturers is to help you create a beautiful home environment, starting from a small faucet!
Article source: Flat disc faucet manufacturer www.baolonghs.com