After purchasing a bathroom faucet, how to use and maintain it correctly is a headache and headache for many users. In fact, with proper installation, use, and maintenance, the practical service life of the faucet can last for a long time and always remain bright as new.

1. Experienced and qualified professionals should be invited to carry out the construction of the equipment. When installing, the faucet should be kept away from hard objects as much as possible, and cement, glue, etc. should not be left on the surface to avoid damaging the luster of the coating. Pay attention to removing debris from the pipeline and installing a faucet.
2. When the water pressure is not less than 0.02mpa (i.e. 0.2kgf/cm2), and after a period of use, if the water output decreases or even shows the appearance of the water heater stalling, the sieve cover can be quietly unscrewed at the outlet of the faucet to remove impurities, and usually the recovery can return to its original state.
3. Don't use too much force to turn on and off the faucet, just quietly change it accordingly. Even traditional faucets do not require a lot of effort to tighten. Especially, do not use the handle as a handrail to support or use it.
4. The metal hose of the showerhead of the bathtub faucet should adhere to a natural stretching condition, and should not be coiled around the faucet when not in use. When using or not in use, be careful not to form a dead angle at the joint between the hose and the valve body to avoid breaking or damaging the hose.
5. The ambitious cleaning trick is to rinse the faucet with clean water, and then use a soft cotton cloth to wipe away all the water on the metal surface of the faucet. As the water evaporates, it will form scale on the metal surface. Quietly scrub, do not vigorously conflict. Drying with a damp sponge and soft skin can make the dragon head shine brightly.
6. It is best to use gentle liquid glass cleaner, or acid free, non abrasive soft liquid and thoroughly dissolved powder. Non conflict solution polishing agent can remove the thick facial mask and deposits on the faucet. Do not use any conflict cleaner, cloth or paper cloth, as well as any acid containing cleaner, polishing conflict agent or rough cleaning agent.