Although the bathroom is small in size, it has many functions. The biggest fear of a bathroom space is that there may be errors in the equipment process, leading to the need to completely demolish and start over in the future, which is not only time-consuming but also time-consuming

Also, unnecessary expenses will be added. The editor teaches you how to choose and inspect bathroom equipment to create a perfect bathroom.

The most important thing for bathhouses is to do a good job in waterproofing engineering

1. Pay attention to the number of drainage holes

Choose according to the number of water outlets to prevent future exchange costs.
A non perforated washbasin and faucet should be installed on the table or on the wall of the washbasin. The cold and hot water pipes of a single hole basin are connected to a single handle faucet through a hole

The faucet has a threaded mouth at the bottom and is fixed to this hole with a nut. The three hole basin can be paired with a single handle hot and cold faucet or a double handle hot and cold faucet. Advocate according to not

Choose different washbasins with the same number of drainage holes to prevent them from being unusable when purchased.

2. Recognition of water and electricity diagrams
Regardless of the type of bathroom equipment, it is necessary to acknowledge it before completing the water and electricity diagram to prevent the occurrence of pipe changes in the future. When using equipment together, construction must be carried out according to the drawings, and every

Each bathroom appliance should have an equipment diagram and a standardized aperture. Simply follow the instructions to ensure that the equipment is functioning properly.

3. Admit water inlet height during equipment installation

Attention should be paid to the overall height of the washbasin, and the height of the inlet system should be made according to the standard drawings. Generally speaking, U-shaped pipe fittings need to be in place to ensure that the water pipe is in line with the

The drainage holes on the wall must be connected and waterproof to prevent leakage when water enters. Other than that, if any damage is found during equipment operation, it should be dealt with immediately

Prevent subsequent damage or rupture.

4. Pay attention to waterproof edges
The edges of the basin and countertop should be treated with waterproof edges. Together, if there is a storage cabinet under the countertop basin of the equipment, try to choose waterproof materials or connectors for the cabinet as much as possible

Waterproof treatment should be done for the contact points, and silicone can be applied to ensure that each contact point has waterproof maintenance.

Fill the gaps between the basin and countertop with silicone and apply waterproof treatment.

5. Try to use stainless steel metal fittings as much as possible
The metal accessories of the equipment should be made of stainless steel or corrosion-resistant materials, and rubber gaskets should be added to the locking point between the bolts and the basin to absorb and buffer the locking bolts

The impact of collision reduces the probability of damage to the equipment.

Select single hole, double hole, or triple hole according to the local location of the faucet on the basin. If the hole dug on the basin is three holes, a three hole faucet must be installed. The hole dug on the basin is a

Then, the device has a single hole faucet.

6. Pay attention to the parts package/equipment package of the equipment

The accessories inside should not be lost or missing, and other parts should also be checked to see if each part has waterproof and waterproof functions. The raw materials for special screws should have

Load bearing and rust prevention.
If there are still carpenters or cement plastering projects going on, pay attention to the preservation and protection of toilet equipment, which can have a maintenance effect.

7. Pay attention to pipe spacing before equipment installation

The distance between the pipes of a toilet is generally 30 centimeters or 40 centimeters. Although some toilets nowadays do not have a distance constraint, if you have a predetermined favorite brand or style in mind, it is recommended to

You should first inquire about the distance scale of the pipeline to prevent the occurrence of equipment incompatibility.

8. Stop hard plugs during equipment operation

When using equipment, it is prohibited to forcefully contact, lock, or use heavy objects to forcefully squeeze or plug, in order to prevent cracks from occurring.

9. Intelligent toilets require reserved power sockets and water inlet equipment

When designing, it is necessary to reserve distribution sockets and water inlet equipment. Nowadays, many new houses will install a power supply near the toilet drainage pipe in advance, but second-hand houses may have an old one

There is usually no reserved socket, and other wiring is required, which affects the overall appearance. Therefore, when renovating old houses, it is necessary to consider whether there is a need to install smart toilets.

10. Edge treatment of separated toilets

When guarding the toilet, attention should be paid to whether the base and drainage holes are aligned, and the edges of the tiles should be treated to prevent poor drainage and odor.

11. Pay attention to the timing and inspection of the bathtub's appearance

If the unit size is small, the bathtub is usually ordered and attention should be paid to the timing of customization and appearance. Upon arrival, it is necessary to inspect and be careful to transfer without any bumps. All items to be unpacked upon arrival

Conduct inspections, such as checking for scratches on the surface and ensuring that the accessories are complete.

12. Recognition of bathtub drainage direction

When choosing a bathtub, it is important to pay attention to whether it is left or right drainage, which is closely related to the installation of faucets and facilitates the installation of drainage systems. Whether the drainage hole is in place is also important

To prevent excessive length, twists, or even unsealed holes that may affect the functionality of the drainage system in the future, it is necessary to reserve repair holes to facilitate untimely inspections. one

The size of the drainage capacity of the bathtub should be acknowledged during piping, whether it should be increased or connected to other pipelines.

13. Leave more drainage holes under the bathtub

Special attention should be paid to waterproofing and drainage at the base of the bathtub. After the waterproofing paint is done, the bathtub should not be installed carelessly. It is best to leave drainage holes below to

To prevent the possibility of water leakage, it can be discharged from the drainage hole in a timely manner without causing water seepage downstairs. When installing a bathtub together, it is important to consider the sufficient support of the side walls. If

If not done well, once the water volume increases, it will cause the bathtub to shift up and down, leading to cracks and water seepage.

14. Pay more attention to the connection point between the bathtub and the side wall

Prevent the occurrence of sharp corners, gaps, and water accumulation. If a standalone bathtub is chosen, the biggest advantage is that it can be placed in the desired position. When using the equipment, it is usually placed on the base

Using Silikon to fix on the ground and advocating the use of products with anti mold ingredients can prevent mold growth and create confusion in future cleaning.

15. Massage bathtub inspection

A motor repair hole should be reserved for the massage bathtub, and the position of the socket should not be too long. It should be securely connected, otherwise it may leak electricity due to loosening over time. And the connection of the power supply

In addition to checking carefully, it is also necessary to test whether the leakage device is functioning properly.

16. Shower sliding doors should be carefully selected for raw materials

When using glass sliding doors for equipment, reinforced glass can be selected to prevent single point impact injuries. Other issues also need to be considered regarding load capacity; Aluminum framed

Pay attention to the contact points, as well as the lubrication of the trajectory, the level of scale, and the sealing effect after closing the door.

17. Main considerations for aluminum frames and hardware

When using shower sliding doors with glass aluminum frames, the selected materials must have strength to prevent damage after impact. The connection between hardware and walls should be genuine

For large areas, fixed support measures should be taken, and when closing the door, attention should be paid to water tightness. At the beginning, the method of the handle, the number of holes, and the size of the aperture should be determined.

18. The aluminum frame and hardware of the sliding door should be connected to the wall to strengthen the load-bearing capacity.

Try not to place the shower sliding door equipment too close to the corner. The orientation of shower door equipment and the orientation and spacing of shower tile walls should be appropriate. No, it's not allowed to turn too close to the outside

Corner, to prevent the formation of tiles from collapsing during drilling. If the corner collapses, the cut tiles should be replaced to increase the difficulty of construction.

19. The air outlet should be connected to the outside, and the pipes should be sealed to prevent carbon monoxide from easily seeping into the room and posing a risk of poisoning.

Some families may choose a bathhouse dryer, and the power load of the bathhouse dryer should be noted. If choosing a multi-functional bathhouse dryer, the load capacity and control of the wires should be considered

The hole orientation of the panel. Due to different brands, special attention should also be paid to whether they match with water and electricity equipment.

Article organization: kaiping bathroom faucet manufacturer www.baolonghs.com