1. When the air temperature is below zero degrees Celsius, if the handle of the faucet feels abnormal, it must be soaked with hot water until the feel of the bathroom product is normal before use. Otherwise, it will affect the service life of the faucet valve core.

2. After the faucet is closed, there will be a dripping scene, which is caused by residual water in the inner chamber of the faucet after it is closed, and it is a normal scene. If there is a dripping condition for more than ten minutes in the long term, it is considered a leakage, indicating that the product has a quality issue.

3. Due to the high content of trace amounts of carbonate in water and the formation of scale on the metal surface after evaporation, it can cause corrosion on the surface of the faucet, thereby affecting its cleaning and service life. So it is important to regularly use a soft cotton or sponge and neutral soap to scrub the surface of the faucet (note: do not use items rich in corrosion or acid to scrub), and then dry the surface with a soft cloth. Avoid using metal wire balls or scouring cloths with harder particles. Also, do not collide with hard objects to damage the surface of the faucet.

4. Don't use too much force to turn on and off the faucet, just turn it quietly and smoothly. Even traditional faucets do not require a lot of effort to tighten. Especially, do not use the handle as a handrail to support or use it. Many people are accustomed to using some force to turn off the faucet after using it, which is not advisable. This will not only prevent water leakage, but also damage the sealing valve, causing the faucet to not be tightly closed.

5. When the water flow decreases, impurities need to be removed. If a decrease in water output is found under a water pressure of no less than 0.02mpa, it may be due to blockage inside the faucet. The solution is to use a wrench to quietly unscrew the water nozzle screen cover at the outlet of the faucet, clean the impurities, and then carefully install it. Usually, you can recover as usual.

6. Use a soft cloth to apply toothpaste to clean the surface, then rinse the surface with clean water. Do not use alkaline cleaning agents or use scouring pads or steel balls to wipe the surface to avoid damaging the electroplated surface.

7. During the use of a single handle faucet, it should gradually open and close, while a double handle faucet should not be closed too tightly, otherwise it will cause the water stop plug to fall off, resulting in the inability to close or stop water.

8. At the outlet, there is usually a foaming device (also known as a foaming device, different faucets, foaming devices are also different). Due to water quality issues, the faucet often has a small water volume after being used for a period of time. This may be due to the foaming device being blocked by debris. You can unscrew the foaming device and use water or a needle to understand the debris.

9. Some faucets have a relatively thick surface electroplating treatment, but attention should also be paid to their maintenance and protection. As the coating cannot withstand hard objects or conflicts, it is advisable to avoid touching hard objects such as rings as much as possible during use.

Article organization: Kaiping bathroom faucet manufacturer www.baolonghs.com