1. The water outlet of the faucet forks or decreases in water volume, without bubbles

Possible cause: Fouling of the filter screen of the bubbler or blockage of dirt such as debris and scale.

Solution: Remove the faucet and clean the filter screen.

2. The water output of the showerhead is small, and the water output forks

Possible reasons: low water pressure or blockage of debris or accumulation of scale inside the showerhead.

Solution: Remove the showerhead and take out the rubber gasket with a filter at the showerhead inlet, or clean the top spray of the showerhead for cleaning.

3. There is noise in the body of the faucet during operation

Possible cause: High water pressure; The handle of the faucet quickly closes; Poor fixation of cold and hot water pipes; There may be obstacles or scale inside the inlet pipe.

Solution: Reduce the water pressure to prevent rapid closure of the faucet and start construction from scratch. Organize the pipeline and check for poor contact between the water pipe and connecting objects (such as water purifiers and water heaters).

4. Difficulty in temperature regulation and frequent fluctuations in water temperature

Possible reasons: The pressure difference between cold and hot water is too large, or perhaps the water heater has been raising the water temperature for too long.

Solution: Turn down the hot and cold triangular valve to balance the pressure, ensuring that the water temperature of the water heater can keep up with the water outlet speed.

Article organization: Kaiping bathroom faucet manufacturer www.baolonghs.com