1. There is no water leakage at the outlet of the faucet: this condition occurs when the axial gasket inside the faucet is worn out. Solution: Select the corresponding pliers according to the size of the faucet, unscrew the faucet cover, and use the pliers to remove the worn shaft gasket. Then replace it with a new one supplemented with a gasket to solve the problem.

2. Leakage at the joint of the faucet receiver: Check if the nut at the receiver is loose. Solution: Tighten the nut or replace it with a new U-shaped sealing gasket.

3. The reason for water leakage in the lower gap of the faucet bolt is due to the wear of the triangular sealing gasket inside the pressure cover. You can loosen the screw and remove the bolt head, then loosen the cover and remove it. Then, take out the triangular seal on the inside of the cover and replace it with a new one.

Article organization: Kaiping bathroom faucet manufacturer www.baolonghs.com